COURSE CONTROL
Start free trial

Rapsodo MLM2PRO GSPro setup

GSPro lists the Rapsodo MLM2PRO as a supported launch monitor, and the connection runs over Bluetooth. It has one step people miss: you authenticate the unit in the Rapsodo app before you start GSPro, and GSPro says to repeat that every 24 hours.

Start free trialTry the live demo
Course Control: control GSPro from your phone · $30 one-time · free trial

Rapsodo MLM2PRO with GSPro at a glance

How it connects
Bluetooth to your Windows PC. The Rapsodo app on your phone authenticates the unit
GSPro option
Rapsodo MLM2Pro edition, or a converted license
Every 24 hours
Authenticate in the Rapsodo app before you launch GSPro
Known limit
The official integration does not cover putting, as of this writing

Connect the MLM2PRO to GSPro in six steps

Work through these in order. If a step differs from GSPro's own guide, follow GSPro's.

  1. 1

    Get the MLM2PRO edition of GSPro

    New buyers choose Rapsodo MLM2Pro on the GSPro site. If you own GSPro for another monitor, use the license conversion page on the GSPro site, then update GSPro and clear your old GSPro Connect settings.

  2. 2

    Check the PC

    GSPro needs Windows 10 or 11 and an internet connection. The MLM2PRO connects to the PC over Bluetooth, so add a USB Bluetooth adapter if your PC has none.

  3. 3

    Update the Rapsodo app and GSPro

    The connection depends on the latest version of the MLM2PRO app, so update it first. Update GSPro too.

  4. 4

    Authenticate in the Rapsodo app

    Before you start GSPro, open the Rapsodo app, go to Play, then Third Party Apps, choose GSPro, and authenticate. Do this each day you play. GSPro says the authentication lasts 24 hours.

  5. 5

    Start GSPro and pick the MLM2PRO

    Launch GSPro with your active license and choose the MLM2PRO connector. Wait for GSPro to show the unit as connected.

  6. 6

    Set up the unit and test

    Place the unit on its tripod behind the ball and aim it at your target, as Rapsodo shows in its setup guide. Hit a few test shots, then load a course.

Where MLM2PRO setups go wrong

Skipping the daily sign-in

The authentication expires. If GSPro connected yesterday and not today, redo the Rapsodo app step first. It has to happen before GSPro starts.

Expecting putting to work

The official integration does not support putting, according to GSPro at the time of writing. Players who want putts read by the simulator add a separate putting solution, such as a putting cam or a webcam. Check the current guide, since this can change.

Your phone is busy

The Rapsodo app needs your phone for the sign-in step. If you want your phone free during play, run Course Control on a tablet or a second phone. Any device with a browser on the same WiFi works.

Official reference: GSPro: Rapsodo MLM2Pro connection guide. GSPro and the launch monitor makers update their steps often, so check the current version if something here no longer matches.

Run the menus from a tablet or second phone

Course Control uses WiFi, not Bluetooth, so it stays out of the MLM2PRO link and does not need the Rapsodo app. Open it on a tablet or a second phone, scan the QR code, and run the GSPro menus from your stance. See how it works.

Start free trial

MLM2PRO and GSPro FAQ

Does the Rapsodo MLM2PRO work with GSPro?

Yes. GSPro lists the MLM2Pro as a supported launch monitor. You need the MLM2Pro edition of GSPro or a converted license, plus a Windows PC with Bluetooth.

How often do I authenticate the MLM2PRO for GSPro?

GSPro says every 24 hours. Do it in the Rapsodo app (Play, Third Party Apps, GSPro) before you start GSPro.

Can I putt with the MLM2PRO in GSPro?

Not through the official integration, according to GSPro at the time of writing. Players add a putting camera or a webcam-based option. Check the current guide, since support can change.

Can I control GSPro from my phone while using the MLM2PRO?

Yes. Course Control runs over WiFi in a browser, so it does not use the Bluetooth link or the Rapsodo app. If you want your main phone free, open it on a tablet.

New to the rest of the setup? Start with the GSPro setup guide.

Once the MLM2PRO is connected, stop walking to the PC

Course Control turns the GSPro controls you use most into buttons on your phone. Scan a QR code and play. $30 one-time after the free trial, no subscription.

Start free trialTry the live demo

Garmin, Rapsodo, FlightScope, SkyTrak, and GSPro are trademarks of their respective owners. Course Control is an independent product and is not affiliated with or endorsed by any of them.

Related guides

Control GSPro from your phoneTurn any phone or tablet into a GSPro remote. No app to install.Read guideGSPro setup guide for beginnersWhat you need to run GSPro and how the pieces connect.Read guideBest GSPro accessoriesThe gear that makes a sim good, ranked honestly.Read guideGarmin R10 GSPro setupPair the R10 over Bluetooth, pick the right GSPro option, and fix the usual drops.Read guideFlightScope Mevo+ GSPro setupConnect over WiFi, place the unit, and handle the two-network catch.Read guideSkyTrak GSPro setupThe OpenAPI route: what to buy, the community interface, and which SkyTrak mode holds up.Read guide